Four Drive Rough Terrain Forklift Basic Info
Model NO.: CPCY 28
Power: Diesel Engine
Max. Lifting Height: 3700 Mm
Fork Length: 1300 Mm
Model: Xinchai 498 Europe III
Length: 4585 Mm
Height: 2720 Mm
Origin: Mainland, China
Type: Powered Pallet Truck
Load Capacity: 1T - 5T
Min. Lifting Height: 100 Mm
Fork Width: 150 Mm
Place of Origin: Zhejiang China
Width: 1780 Mm
Certification: CE ISO
Specification: CPCY 28
HS Code: 84272090
Four Drive Rough Terrain Forklift Product Description
Four Drive Rough Terrain Forklift Features
1. The CPCY28 four drive rough terrain lift truck has perfect ground clearance and special off-road tires.
2. Its front axle is equipped with four-wheel drive with an anti-skating device. The four driverough terrain lift truck is characterized by the compact structure design between engine and gearbox, so it can operate on rough terrain, sand or mud basin.
3. Its front frame has no fork working device or front drive axle and there are no operating devices or rear drive axle on rear frame.
4. The four drive rough terrain lift truck has a steering cylinder between the rear and front frames.
5. Its rear frame has the power devices which are respectively connected to front and rear drive axle.
6. Using four-wheel drive, the four drive rough terrain lift truck can increase its forklift power for effective material loading, unloading and transporting and so on. It has sound traffic ability, larger traction force and so on. Since there is not need for the front drive axle with steering device, the machine can use the same drive axle with the rear drive axle to lower the cost.
|Main Technical Parameters of CPCY28|
|Rated load (KG)||2800|
|Load center (mm)||565|
|Lifting height (mm)||3000|
|Free lift height (mm)||150|
|Mast tilt angle front/rear (°)||6/12|
|Max lifting speed (full load) (mm/s)||372|
|Running speed (km/h)||Advance:I gear/II gear||8/16|
|Backlash:I gear/II gear||8/16|
|Max climbing gradient (%) (full load)||50|
|Max traction (Kgf)||2587|
|Max steering angle (°)||±35|
|Swinging angle of rear axle (°)||±12|
|Min turning radius (mm)||4500|
|External dimensions||Length (mm)||4585||Tooth|
|Min ground clearance (mm)||260|
|Dead weight (Kg)||3268|